您好：歡迎來到山東嘉瑞杰機械科技有限公司網站！收藏本站

常見問題

當前位置：

新聞資訊 > 常見問題

常見問題

公司新聞

行業動態

產品

聯系嘉瑞杰

山東嘉瑞杰機械科技有限公司
聯系人：王經理
電話：0531-88670722
手機 : 15866677695

http://www.submersiblepump.net.cn

地址：濟南市天橋區梓東大道鑫茂科技城143號樓102室

功能手板對于尺寸要求較高

來源：http://www.submersiblepump.net.cn作者：山東嘉瑞杰機械科技有限公司發布時間：2019-07-25

濟南手板模型是先根據設計圖紙制作而成的模型，主要是用來檢查的，并不是真正要設計的產品，只是一種樣品，以此為基礎，才能找出缺陷與問題所在。

Hand model is designed according to the design drawings of the model, mainly used for inspection, not the product to be designed, just a sample, based on this, in order to find out the defects and problems.

在設計之初，根據手板模型找出問題不合理的地方，并加以改正。但在設計時有一個問題要注意，那就是剛開始的設計模型不能設計的在好，否找找不出缺陷，如果不經過仔細檢查，一旦成批量的生產，將會(huì )造成很大的資源浪費，其中包括有人力物力還有時間，這對企業來說是忌諱的。手板模型三大用途：

At the beginning of the design, according to the hand model to find out the problem of unreasonable place, and to correct. But there is a problem in the design should pay attention to, that is the beginning of the design of model design cannot be in good, not for a defect, if not carefully checked, once the production batch, it will cause a great waste of resources, including manpower and time, this is a taboo for enterprises it. Three uses of hand model:

1、結構手板;主要檢測產品的結構合理性，對于尺寸要求較高，對外觀要求相對較低，國外對這類要求尤為嚴格。

1, the structure of the hand; the main test product structure is reasonable, for high dimensional requirements, relatively low appearance requirements, foreign countries are particularly strict with such requirements.

2、外觀手板;主要檢測產品的外觀設計，要求外觀精美，顏色準確。對內部的處理要求不高，有些的內部直接做成實心體。

2, the appearance of the hand; the main inspection of the product design, requires exquisite appearance, color is accurate. The internal processing requirements are not high, some of the internal solid body directly.

3、功能手板;要求實現跟真正的產品一樣完全相同的外觀、結構及功能，可以理解為未上市的成品，是要求高，難度大的一類手板。

3, functional hand plate; request to achieve the same as the real product appearance, structure and function, can be understood as the finished product is not listed, is a high demand, a difficult kind of hand plate.

以上便是濟南手板今天的分享，您還滿意嗎，歡迎關注我們的網站:http://www.submersiblepump.net.cn 并且關注我們的產品，我們將為您提供優良的產品，衷心的愿與您建立合作關系。

The above is the Yantai hand today's share, you are satisfied, welcome to pay attention to our website: http://www.submersiblepump.net.cn and pay attention to our products, we will provide you with good products, and sincerely willing to establish a partnership with you.