醫療機箱外殼制作過程并不復雜，但是要求要做工精細，且外觀要美觀大方的同時，也要確保有醫療設備的氣正性，因此從色彩搭配到機箱外觀必須嚴苛挑選。下邊山東快速成型廠家給大伙兒介紹有關醫療器械外殼的制作過程和質量檢驗層面的事宜。

醫療機械的制做生產過程是零部件成形，隨后對制做好的零部件開展打磨生產加工，圓潤后組裝零部件，拼裝進行后對機箱總體開展打磨，接縫處一部分開展打磨工作中，隨后便是對醫療外殼開展噴涂工作中。到這一步以后全部診療。

The manufacturing and production process of medical machinery is the formation of parts, and then the polished parts are polished and processed. After rounding, the parts are assembled, and after assembly, the overall chassis is polished. Part of the joints are polished, and then the medical shell is sprayed. After this step, all diagnosis and treatment.

機箱外殼就制做完成了，下面便是對機箱制成品開展質量檢驗。質量檢驗并不是說都放到后面的一步開展，實際上，在每一個流程的情況下，必須開展質量檢驗，以從每一個階段降低重工機械率。嚴格把關外觀設計品質及內部結構品質，外觀品質關鍵看這幾層面：

The chassis shell is finished. The following is the quality inspection of the chassis finished products. Quality inspection does not mean that it is carried out in a later step. In fact, in the case of each process, quality inspection must be carried out to reduce the rate of heavy industry machinery from each stage. Strictly control the appearance design quality and internal structure quality. The appearance quality depends on these aspects:

外觀品質要嚴格把關，不能有規格不符合狀況，假如維修失敗，務必損毀解決。外觀不可以有碰刮傷，噴漆漆以后，要對機箱的耐蝕性、偏色等好幾個層面開展檢驗，假如不合格則維修或者開展損毀解決。

The appearance quality should be strictly controlled. There should be no specification nonconformity. If the maintenance fails, it must be destroyed and solved. The appearance shall not be scratched. After painting, the corrosion resistance and color deviation of the chassis shall be inspected. If it is unqualified, it shall be repaired or damaged.

此外鋁殼電機的熱維護保養不斷造成姿態時,應查明常見問題來自鋁殼電機還是負載或維護機器設備整穩態值太低,常見問題后,就可以資金分配運作。運用地理環境應經常保持干燥,電動機表面應維持整潔,進風口不能受塵土、合成纖維等阻止

In addition, when the thermal maintenance of the aluminum shell motor continues to cause posture, it is necessary to find out whether the common problem is from the aluminum shell motor or the load or maintenance of the machine and equipment, and the steady-state value is too low. After eliminating the common problems, the fund can be allocated for operation. The geographical environment should always be kept dry, the motor surface should be kept clean, and the air inlet should not be prevented by dust, synthetic fibers, etc

當軸承的使用期結束時,電動機運作的振動及噪聲將明顯擴張,檢查軸承的徑向側隙保證下列值時,即應拆換軸承。應保證鋁殼電機在運作整個過程中的潤滑。等等。

When the service life of the bearing ends, the vibration and noise of the motor operation will expand significantly. When the radial side clearance of the bearing is checked to ensure the following values, the bearing should be replaced. The aluminum shell motor shall be lubricated with high quality during the whole operation process. wait.

醫療機箱外殼的制作過程和質檢介紹內容，相關的注意事項您愛可以來關注我們網站http://www.submersiblepump.net.cn進行咨詢了解的。

The manufacturing process and quality inspection of the medical case shell, as well as relevant precautions, you can pay attention to our website http://www.submersiblepump.net.cn Consult and understand.